About Forged Aluminum Shifter for Kawasaki Z125 Pro
The TB Forged shifter for the Kawasaki Z125 Pro will give a firm shift feel and add a bit of style to your Z. Available with a Black or Green shift tip.
Reviews
17 reviews for Forged Aluminum Shifter for Kawasaki Z125 Pro
Rated 5 out of 5
Adam Van haaften (verified owner)–
Could be my favorite mod yet. Some people claim neutral is hard to find. I dont have that issue. Shifting is so much better and now I have it adjusted for the right position. The look fits so well too.
Rated 5 out of 5
Adam Ashley (verified owner)–
A very nice, quality part. Added 5hp at the rear wheel and the ability to wheelie in 4th. Okay, it only wheelies in 3rd but the part is nice. Can’t wait for more Monkey parts. Tail light please!
Rated 5 out of 5
Suga Sean (verified owner)–
Clean setup without the sloppy factory look. Fir and finish is on par for sure.
Rated 2 out of 5
mnnthbx1 (verified owner)–
I really, really wanted to like this. The stock shifter is mushy, cheap looking, and has overly complicated linkage. This simplifies it all and looks great. The spring tension on the knurled tip feels solid. Overall build quality gave me a good feeling. Unfortunately the good news stops there.
I installed this without too much of a hassle, though you will want some snap ring pliers to remove the factory snap ring. Once installed I went for a ride. It didn’t feel much different from stock. It was still mushy when you reach 1st or 4th, and now neutral is a bear to find. I’ve never had a bike this difficult to find neutral. Some you can only find from 2nd, others from 1st, but this was all over the place. Perhaps things will work themselves out after a few hundred miles (I only have about 300 so far) and my first oil change, but I am going back to the stock shifter for now. A must buy if you do not plan on riding your bike.
Rated 5 out of 5
Doug (verified owner)–
This was a great affordable upgrade!
It’s a very easy install on!
Rated 5 out of 5
Mark (verified owner)–
awsome
Rated 5 out of 5
Lee (verified owner)–
Holy Moly it feels so good. What a good little upgrade. 🙏
Rated 5 out of 5
Dan Bacis (verified owner)–
Feels great while shifting, no play in it at all. Was a very easy swap to do.
Rated 4 out of 5
Capt Z (verified owner)–
A nice way to clean up the vague shifting feel with the stock linkage. This shifter is longer than stock so if you have a short foot like i do you will need to adjust your position on the footpeg. Shift feel is much improved!
Rated 5 out of 5
Garrett phillips (verified owner)–
Such an upgrade! My z125 shifts sooo much better. Some of the best money I have spent out of lots of mods.
Rated 5 out of 5
Javier L Rivera (verified owner)–
Good mod no more ghost shift
Rated 5 out of 5
Javier L Rivera –
Good mod no more ghost shift
Rated 5 out of 5
Javier L Rivera (verified owner)–
Good mod no more ghost shift
Rated 5 out of 5
charles freeman (verified owner)–
Awesome product and fast shipping as always from them. Will say it’s a little annoying to go into neutral, have to do it a few times to get it in. Not a deal breaker to me.
Rated 5 out of 5
charles freeman –
Awesome product and fast shipping as always from them. Will say it’s a little annoying to go into neutral, have to do it a few times to get it in. Not a deal breaker to me.
Rated 5 out of 5
James W –
Part was easy to install, and shifting has a very connected and direct feel.
Rated 5 out of 5
James W (verified owner)–
Part was easy to install, and shifting has a very connected and direct feel.
Be the first to review “Forged Aluminum Shifter for Kawasaki Z125 Pro” Cancel reply
The same insane quality trim-blend shirt base we’ve become famous for, in our women’s tank summer design…. Note: pretty true to size, and won’t shrink. Slightly fitted. If you’re in between sizes, go up. If…
$10.00
MNNTHBX 89’er Mens Tank
The same insane quality 60/40 MNNTHBX mens Tank …. Note: pretty true to size, and won’t shrink. Slightly fitted. If you’re in between sizes, go up. If not, it will be spot on, just like…
$17.00
MNNTHBX Plain Ole Tee
The same insane quality tri-blend shirt base we’ve become famous for, in our Plain Ole Tee design…. Note: pretty true to size, and won’t shrink. Slightly fitted. If you’re in between sizes, go up. If…
$199.95
CJR ECU module with MNNTHBX map for 2019-2021 Honda Monkey
ECU for 2019 through 2021 Honda Monkey Unlock the full potential of your Honda Grom with a CJR Performance ECU Flash! With CJR/MNNTHBX CUSTOM TUNED ECU. We have ECU’s available flashed for our most common options…
17 reviews for Forged Aluminum Shifter for Kawasaki Z125 Pro
Adam Van haaften (verified owner) –
Could be my favorite mod yet. Some people claim neutral is hard to find. I dont have that issue. Shifting is so much better and now I have it adjusted for the right position. The look fits so well too.
Adam Ashley (verified owner) –
A very nice, quality part. Added 5hp at the rear wheel and the ability to wheelie in 4th. Okay, it only wheelies in 3rd but the part is nice. Can’t wait for more Monkey parts. Tail light please!
Suga Sean (verified owner) –
Clean setup without the sloppy factory look. Fir and finish is on par for sure.
mnnthbx1 (verified owner) –
I really, really wanted to like this. The stock shifter is mushy, cheap looking, and has overly complicated linkage. This simplifies it all and looks great. The spring tension on the knurled tip feels solid. Overall build quality gave me a good feeling. Unfortunately the good news stops there.
I installed this without too much of a hassle, though you will want some snap ring pliers to remove the factory snap ring. Once installed I went for a ride. It didn’t feel much different from stock. It was still mushy when you reach 1st or 4th, and now neutral is a bear to find. I’ve never had a bike this difficult to find neutral. Some you can only find from 2nd, others from 1st, but this was all over the place. Perhaps things will work themselves out after a few hundred miles (I only have about 300 so far) and my first oil change, but I am going back to the stock shifter for now. A must buy if you do not plan on riding your bike.
Doug (verified owner) –
This was a great affordable upgrade!
It’s a very easy install on!
Mark (verified owner) –
awsome
Lee (verified owner) –
Holy Moly it feels so good. What a good little upgrade. 🙏
Dan Bacis (verified owner) –
Feels great while shifting, no play in it at all. Was a very easy swap to do.
Capt Z (verified owner) –
A nice way to clean up the vague shifting feel with the stock linkage. This shifter is longer than stock so if you have a short foot like i do you will need to adjust your position on the footpeg. Shift feel is much improved!
Garrett phillips (verified owner) –
Such an upgrade! My z125 shifts sooo much better. Some of the best money I have spent out of lots of mods.
Javier L Rivera (verified owner) –
Good mod no more ghost shift
Javier L Rivera –
Good mod no more ghost shift
Javier L Rivera (verified owner) –
Good mod no more ghost shift
charles freeman (verified owner) –
Awesome product and fast shipping as always from them. Will say it’s a little annoying to go into neutral, have to do it a few times to get it in. Not a deal breaker to me.
charles freeman –
Awesome product and fast shipping as always from them. Will say it’s a little annoying to go into neutral, have to do it a few times to get it in. Not a deal breaker to me.
James W –
Part was easy to install, and shifting has a very connected and direct feel.
James W (verified owner) –
Part was easy to install, and shifting has a very connected and direct feel.