KTM Duke 790/ 890 Duke R Integrated Tail Fender Eliminator by MNNTHBX (PRE ORDER)

onbackorder
Price
$150.00
Select options
About KTM Duke 790/ 890 Duke R Integrated Tail Fender Eliminator by MNNTHBX (PRE ORDER)
  MNNTHBX Fender Eliminator for KTM 790/KTM 890 We'll say up front, you can easily find cheaper fender eliminators for your KTM 790 Duke and KTM 890 Duke . We decided to build what we felt was the highest quality, cleanest kit possible, disregarding costs restraints. This is a COMPLETE kit, built around Rizoma's amazing Corsa S lights. Held in our Delrin base, they provide integrated running lights, brake lights, and signals. Our micro plate light sits above a powdered stainless plate mount. We did our best to display the function in the video below, but the camera just doesn't do these justice. These Italian beauties are simple the brightest lights we've ever seen.   NOTE: You will need to use the supplied Rizoma resistors when completing the wiring or have your KTM dealer switch your ECU to LED mode to achieve the correct flash rate and for no codes to display. Wiring
Specficiations

Lights in action
Reviews

16 reviews for KTM Duke 790/ 890 Duke R Integrated Tail Fender Eliminator by MNNTHBX (PRE ORDER)

  • Cody Holloway (verified owner)

    Looks amazing on the bike. Great build quality. As I am no expert; but it was easy enough to figure out with the wiring chart on the web page. Would definitely recommend this product, it’s awesome and works great !

  • Sudipti Singh (verified owner)

    The lights look great, they are freakin’ bright (even in daylight), and I never miss not having a proper brake light. All other tail tidies try to stick a brake light on where KTM obviously neglected to integrate it (seriously, why does the 390 get an integrated one and we don’t??), and it just looks wrong. I much prefer the look of this, as the design is very intentional and super minimalist, and bonus points for working great with the stock exhaust. You’ll be hard pressed to find any competitor to this, believe me, I searched Google and various forums desperately until I came across this. Also, if you’re scoffing at the price, you should notice that this comes with two of the $100 Rizoma Corsa S lights, so it’s pretty much a $100 tail tidy. Kind of a no-brainer if you were going to get aftermarket tail lights anyway.

  • Will Curtiss (verified owner)

    Well, what can I say about this product. For starters, it looks incredibly clean. There is no other kit I would recommend if looks are your number one priority.

    Be aware: If you have little or no experience stripping wires and connecting them, or you lack the confidence to do so, this is not the product for you. You are going to have to strip the wires in your bike as well as the provided tail lights/turn signals. But if you are willing to do so and you follow the easy to understand wiring diagram you will come out with the best looking tail kit for the bike, making it look even better.

    And as for the price, I get that it is expensive, do you think I really wanted to drop $300 on a tail tidy? Of course I didn’t, but when you compare it to the other options and realize the value of the included lights, it isn’t as the face value might make it seem.

    Overall I would recommend this product to anyone with the knowledge or willingness to connect wires through butt connectors or what ever your preferred method is. I am very pleased with the final product!

    • kevin estep

      Thanks for the review. Be aware we offer posi-taps in the product menu for those needing a easy, non invasive installation.

  • Jon Porter (verified owner)

    Clean kit! This kit came quickly even during the COVID-19 pandemic. Quality parts feel great and look even better. Wiring isn’t bad if have an idea of what to do. You get included tail lights that are probably worth the $300 themselves. The mounting bracket feels quality. This kit is a definite buy for anyone questioning it. Only down side is that I haven’t bought front turn signals yet and the rear setup makes the stock front signals look like trash lol.

  • ManuelFilho (verified owner)

    Probably the best looking tail tidy on the market. The only reason I don’t give it 5 stars is because the plate light glares the look from behind at night, I tuned it off.

  • Wesley Schoonmaker (verified owner)

    Just bought this kit for my 2021 890r and it fit perfectly! Wiring was simple after following the diagram on the website.

  • Conner (verified owner)

    Awesome product, cleans up the bike and makes it look so much better. Love the Rizoma lights as well!

  • Jon Smith (verified owner)

    Oh Man installed the MNNTHBX on my KTM 890 R and looks Killer, and was blown away how fast it showed up at my door. Best looking tail tidy on the Market imo. Thanks MNNTHBX.

  • Cam Clark (verified owner)

    Fit and finish are amazing…easy to install and cleans up the back end awesome!!!!

  • J. Williams (verified owner)

    This product did not disappoint. It looks amazing on my 2022 890 Duke R. The installation was straight forward and the wiring diagram was easy to follow. I had my KTM dealer switch the computer to LCD mode and didn’t have to bother with the resistors. I took the time to order the correct crimp pins and install the factory connector, it looks like a stock install and I couldn’t be happier.

  • Adam (verified owner)

    Simply put…Phenomenal!

    Don’t let the price deter you, the fit and finish is on point, clean? Soooooo clean! Ive owned many many bikes all with a tail tidy and this one is by far the nicest and cleanest.

    Install on the tail tidy was overly easy, wiring the Rizoma lights was a bit more in depth, note: I did not buy the wiring adapters offered as am very comfortable with wiring, and Rizoma was very helpful with information needed for resistors.

    Kevin was awesome to deal with.

    All in all I am over the rev limiter happy with this tail tidy and woukd reccomend MNNTHBX to anyone remotely interested

  • Dave (verified owner)

    This is my third tail tidy for my 890 Duke R cause I could not justify spending the money at the time. I started with the evotech but the brake light was dim and hard to see, then I went with the competition werks and it used the factory tail light but I melted my turn signals. I finally decided to drop the money on the MNNTHBX tail tidy and I am so happy I did. Lights are bright and out of the way of the exhaust. Best build quality keeping all the wires tucked inside. Kit comes complete with everything you need to eliminate the fault code. I should have trusted my gut the first time.

  • Mahadzir Hares (verified owner)

    By far the best-looking tail tidy for 890 Duke R. Outclass & outperformed the rest of the other tail tidy out there. Although the pricing is slightly on the high side (due to the Rizoma blinkers) you get your money’s worth. Installation was breezed with provided posi-taps just follow the instruction you won’t go wrong.
    Build quality is top-notch. Feels solid to the touch. Since I’m located overseas, delivery was also fast (ordered Friday and got it Monday). I will definitely recommend this product to all 790 & 890 Duke owners out here. Get this and forget the rest.

  • J. R. (verified owner)

    Best elimination kit!! Love the simple minimalist design. My Duke now looks how it should;)

  • Brandon (verified owner)

    Cleanest tail tidy out there by far. Install was not difficult. I recommend purchasing the ktm pigtails as well, this makes the signals plug and play for the front and makes it so you only have to splice 3 wires in the rear(for the brake light). All in all 5/5, I’m super satisfied with it.

  • Ryan (verified owner)

    After searching, this looked to be the cleanest and sleekest tail tidy available for the Duke. Having Rizoma signals on a previous bike I knew this was worth the cost. Once installed it disappears and the signals are tucked close so they don’t interfere with the exhaust. Despite being significantly smaller than stock, they are much brighter. Fit and finish of the aluminum mount is perfect with everything mounting up nicely. The plate light is difficult to line up and tighten in the small space and the nut is just knurled plastic so be careful. I don’t have much experience wiring but using the diagram and following the video helped clarify any questions. Just make sure you note where you cut the factory wiring as the some of the wire colors change on either side of the connectors. Signals come with bullet connectors attached and plate light has no connectors. I opted to use some of the bullets and connect the rest with solder and heat shrink.


  • Be the first to review “KTM Duke 790/ 890 Duke R Integrated Tail Fender Eliminator by MNNTHBX (PRE ORDER)”

    Your email address will not be published. Required fields are marked *