Our lightened primary for the Kawasaki Z125 will greatly enhance throttle response and acceleration dramatically. Drop rotational mass from 2.4lbs to just .5lbs. Easy install under the clutch cover.
Reviews
7 reviews for Lightened Primary for Kawasaki Z125 Pro
Rated 5 out of 5
doroyce05 (verified owner)–
Well worth the price and work. This mod shaves off rotational mass on a motor that doesn’t have that much power, to begin with. The install is not that hard but an impact gun was really useful even if it is a weak one (over 100 lb/s) impact gun.
Rated 5 out of 5
Justin (verified owner)–
Great value for better throttle response and a quicker acceleration through the mid range. Installation is a piece of cake. Get one. You’ll be glad you did.
Rated 5 out of 5
Mike –
So happy products like these are available. Really love how snappy the throttle is and paired with the HD clutch, really changes the feel of this little bike.
Rated 5 out of 5
Louis Journett III (verified owner)–
So happy with purchase. Fast and easy install. Added Hd clutch and made difference in responsiveness.
Rated 3 out of 5
Matt (verified owner)–
Does exactly what others say it does. But it also has a 50/50 chance of making a whining sound like an old ford power steering pump. It’s loud. So loud you easily hear it over the hindle exhaust, which is obscenely loud. it also makes it very easy to stall the bike. Wish they made a middleweight primary. Between stock and this one. I can deal with the stalls since I know the bike, but I think I’m going to put the stock one back in. The sound is just too loud.
kevin estep –
You’ll adapt to the clutch work required in a very short time. The whining is personal to each owner, but most enjoy the sound. Regardless, hope your enjoy the added snap.
Rated 5 out of 5
Craig Davies (verified owner)–
Everything feels lighter, engine doesn’t struggle to rev. No problem with stalling on take off. A bit of a whining noise a until break in with clutch gears but barely noticeable after 100 miles or so. Would recommend…
Rated 5 out of 5
Zachary Brennan (verified owner)–
The talked about noise that this makes is not even noticeable with a helmet on. Noise is also only heard under certain load conditions and mostly under deceleration. I have yet to have any stalling issue with it installed as well. Personally, I see no down side with this mod.
Kevin Estep –
Questions…. You stated we would buy it back, but never contacted us to see if we would buy it back…… You clearly stated it performed well. Was it loud? Yes it makes more noise, but most people enjoy that sound honestly. Why was the bike stalling? Because you eliminated the OEM flywheel…. It does take a bit of rider adjustment, but the rewards are worth the effort, as proven but hundreds of buyers. Contact us directly if you need a resolution, and we’ll be glad to help.
Be the first to review “Lightened Primary for Kawasaki Z125 Pro” Cancel reply
Vortex Aluminum Sprocket (206)- Honda DAX 125 (4 COLOR OPTIONS)
Vortex 420 Aluminum Sprockets for the Honda DAX Available in either RED, BLUE, BLACK or SILVER in tooth size 34-37. The Vortex CAT5 Series Rear Sprockets are anodized in color FIRST then CNC machined from…
$7.99
2022+ HONDA DAX — OIL & FILTER CHANGE KIT
When its time to change the oil & filter in your DAX, go with high quality products like a HiFlo oil filter and Motul oil. Your choice of either Motul full synthetic or non-synthetic Motul…
$375.00
Progressive Suspension 412 Series BLACK Shocks –
The 412 Series shocks are simply the best value shock on the market today. The 412s simple, durable design means they will be an improvement to your motorcycle’s suspension performance for as long as you…
$359.00
DHM Gen 2 149cc Big Bore Cylinder kit for Honda DAX
After over a year of development, the Gen 2 big bore 149cc kit is ready to go! Kit includes: 55mm Forged Piston with RK Ring kit 55mm Sleeved cylinder Base and head gasket set…
7 reviews for Lightened Primary for Kawasaki Z125 Pro
doroyce05 (verified owner) –
Well worth the price and work. This mod shaves off rotational mass on a motor that doesn’t have that much power, to begin with. The install is not that hard but an impact gun was really useful even if it is a weak one (over 100 lb/s) impact gun.
Justin (verified owner) –
Great value for better throttle response and a quicker acceleration through the mid range. Installation is a piece of cake. Get one. You’ll be glad you did.
Mike –
So happy products like these are available. Really love how snappy the throttle is and paired with the HD clutch, really changes the feel of this little bike.
Louis Journett III (verified owner) –
So happy with purchase. Fast and easy install. Added Hd clutch and made difference in responsiveness.
Matt (verified owner) –
Does exactly what others say it does. But it also has a 50/50 chance of making a whining sound like an old ford power steering pump. It’s loud. So loud you easily hear it over the hindle exhaust, which is obscenely loud. it also makes it very easy to stall the bike. Wish they made a middleweight primary. Between stock and this one. I can deal with the stalls since I know the bike, but I think I’m going to put the stock one back in. The sound is just too loud.
kevin estep –
You’ll adapt to the clutch work required in a very short time. The whining is personal to each owner, but most enjoy the sound. Regardless, hope your enjoy the added snap.
Craig Davies (verified owner) –
Everything feels lighter, engine doesn’t struggle to rev. No problem with stalling on take off. A bit of a whining noise a until break in with clutch gears but barely noticeable after 100 miles or so. Would recommend…
Zachary Brennan (verified owner) –
The talked about noise that this makes is not even noticeable with a helmet on. Noise is also only heard under certain load conditions and mostly under deceleration. I have yet to have any stalling issue with it installed as well. Personally, I see no down side with this mod.
Kevin Estep –
Questions…. You stated we would buy it back, but never contacted us to see if we would buy it back…… You clearly stated it performed well. Was it loud? Yes it makes more noise, but most people enjoy that sound honestly. Why was the bike stalling? Because you eliminated the OEM flywheel…. It does take a bit of rider adjustment, but the rewards are worth the effort, as proven but hundreds of buyers. Contact us directly if you need a resolution, and we’ll be glad to help.